Brand: TORK CRAFT
Model: TCAC050-2
Annular Cutters 55mm long
Annular Cutter: Ø 50
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 2,214.00
Ex Tax:R 1,925.22
Brand: TORK CRAFT
Model: TCAC055-2
ANNULAR HOLE CUTTER HSS 55 X 55MM BROACH SLUGGER BIT....
R 2,214.00
Ex Tax:R 1,925.22
Brand: TORK CRAFT
Model: TCAC048-2
Annular Cutters 55mm long
Annular Cutter: Ø 48
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 1,845.00
Ex Tax:R 1,604.35
Brand: TORK CRAFT
Model: TCAC055-1
ANNULAR HOLE CUTTER HSS 55 X 30MM BROACH SLUGGER BIT....
R 1,722.00
Ex Tax:R 1,497.39
Brand: TORK CRAFT
Model: TCAC046-2
Annular Cutters 55mm long
Annular Cutter: Ø 46
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 1,717.00
Ex Tax:R 1,493.04
Brand: TORK CRAFT
Model: TCAC058-1
ANNULAR HOLE CUTTER HSS 58 X 30MM BROACH SLUGGER BIT....
R 1,599.00
Ex Tax:R 1,390.43
Brand: TORK CRAFT
Model: TCAC045-2
Annular Cutters 55mm long
Annular Cutter: Ø 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 1,599.00
Ex Tax:R 1,390.43
Brand: TORK CRAFT
Model: TCAC050-1
Annular Cutters 30mm
Annular Cutter: Ø 50
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 1,599.00
Ex Tax:R 1,390.43
Brand: TORK CRAFT
Model: TCAC044-2
Annular Cutters 55mm long
Annular Cutter: Ø 44
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 1,539.00
Ex Tax:R 1,338.26
Brand: TORK CRAFT
Model: TCAC048-1
Annular Cutters 30mm
Annular Cutter: Ø 48
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 1,488.00
Ex Tax:R 1,293.91
Brand: TORK CRAFT
Model: TCAC046-1
Annular Cutters 30mm
Annular Cutter: Ø 46
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 1,459.00
Ex Tax:R 1,268.70
Brand: TORK CRAFT
Model: TCAC044-1
Annular Cutters 30mm
Annular Cutter: Ø 44
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 1,373.00
Ex Tax:R 1,193.91
Brand: TORK CRAFT
Model: TCAC038-2
Annular Cutters 55mm long
Annular Cutter: Ø 38
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 1,230.00
Ex Tax:R 1,069.57
Brand: TORK CRAFT
Model: TCAC040-2
Annular Cutters 55mm long
Annular Cutter: Ø 40
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make h..
R 1,230.00
Ex Tax:R 1,069.57
Brand: TORK CRAFT
Model: TCAC045-1
Annular Cutters 30mm
Annular Cutter: Ø 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes..
R 1,200.00
Ex Tax:R 1,043.48